Equalizers Adjustment - Viscount Chorale 2 Mode D'emploi

Owner's Manual

7.3 EQUALIZERS ADJUSTMENT

Your Chorale organ is equipped with two 5-band graphic equalizers for the sound control. There is one
equalizer for controlling the signal to the internal loudspeakers and a second for the signal to the audio
outputs ([OUTPUT 1] and [OUTPUT 2]). In order to display these adjustments, select EQUALIZER and
press [ENTER].
o INT. EQUALIZER: this displays the internal equalizer
o EXT. EQUALIZER: this displays the audio outputs equalizer
_INTERNAL Üíïë. äñ._
FREQ:
GAIN: +4
As you can see the following parameters appear on the right of the screen:
o FREQ: central trigger frequency.
o GAIN: gain of the signals with frequencies close to that stated in the FREQ parameter.
The [FIELD ] e [FIELD ] buttons can be used to select the trigger frequency; then use the [VALUE +]
and [VALUE -] buttons to regulate the attenuation (negative values) or enhancement (positive values) of
the signal in a range of +/- 8 dB.
A graphic indication of the equalizer is also displayed on the right of the screen, in real time.
Here again, after making the settings you require, press the [EXIT] button to save the modifications and
return to display of the SET UP menu.
NOTES
- The external equalizer settings also affect the signals supplied to the RCA [OUTPUT] outputs
in the recess underneath the manuals.
- The equalizers adjustment settings are also stored in the Organ Style. This means that organ
styles with different types of external equalization may be available, and that when a different
style is recalled the equalizer may be modified.
___EQUALIZER íäìõ___
INT. EQUALIZER
EXT. EQUALIZER
_
60 Hz Ø ª ØØ
dB ØØØØØ
Viscount
_EXTERNAL îõô. äñ.__
FREQ: 60 Hz
GAIN: +4
59
Chorale 2 - Chorale P31
_
ØØ ª
dB ØØØØØ