Table des Matières
Publicité
and in this manual.
REMEMBER: USE ONLY HITACHI BATTERY TYPES EB7 SERIES, EB9 SERIES, EB12 SERIES, EB14 SERIES. EB18
SERIES. OTHER TYPES OF BATTERIES MAY BURST AND CAUSE INJURY!
Follow these instructions to avoid the risk of injury:
WARNING:
Improper use of the battery or battery charger can lead to serious injury. To avoid these injuries:
1.
NEVER
disassemble the battery.
2.
NEVER
incinerate the battery, even if it is damaged or is completely worn out. The battery can explode in a fire.
3.
NEVER
short-circuit the battery.
4.
NEVER
insert any objects into the battery charger's air vents. Electric shock or damage to the battery
charger may result.
5.
NEVER
charge outdoors. Keep the battery away from direct sunlight and use only where there is low
humidity and good ventilation.
6.
NEVER
charge when the temperature is below 32°F (0°C) or above 104°F (40°C).
7.
NEVER
connect two battery chargers together.
8.
NEVER
insert foreign objects into the hole for the battery or the battery charger.
9.
NEVER
use a booster transformer when charging.
10. NEVER
use an engine generator or DC power to charge.
11. NEVER
store the battery or battery charger in places where the temperature may reach or exceed 104°F (40°C).
12. ALWAYS
operate charger on standard household electrical power (120 volts). Using the charger on any
other voltage may overheat and damage the charger.
13. ALWAYS
wait at least 15 minutes between charges to avoid overheating the charger.
14. ALWAYS
disconnect the power cord from its receptacle when the charger is not in use.
SAVE THESE INSTRUCTIONS
NOTE: The information contained in this Instruction Manual is designed to assist you in the safe operation and
maintenance of the power tool.
NEVER operate, or attempt any maintenance on the tool unless you have first read and understood all
safety instructions contained in this manual.
Some illustrations in this Instruction Manual may show details or attachments that differ from those on
your own power tool.
SPECIFICATIONS
1.
Cordless Impact Driver
Model
Voltage
No-Load speed
Capacity (Ordinary bolt)
Tightening torque
(Maximum)
Weight
2.
Cordless Impact Wrench
Model
Voltage
No-Load speed
Capacity (Ordinary bolt)
Tightening torque
(Maximum)
Weight
3.
Battery Charger
Model
Charging voltage
2.0 Ah
Charging time
2.6 Ah
3.0 Ah
Weight
All charge times are approximate. Actual charge time may vary.
"x" Indicates that the battery pack is not compatible with that specific charger.
FUNCTIONAL DESCRIPTION
WH9DMR
9.6 V
M5 – M12
930 in-lbs
(105 N·m)
3.1 lbs. (1.4 kg)
3.5 lbs. (1.6 kg)
WR9DMR
9.6 V
M6 – M14
1,020 in-lbs
(115 N·m)
3.1 lbs. (1.4 kg)
3.5 lbs. (1.6 kg)
UC14YFA
7.2 – 14.4 V
50 min.
65 min.
70 min.
1.3 lbs. (0.6 kg)
WH12DMR
WH14DMR
12 V
0 – 2600 / min
1,150 in-lbs
1,240 in-lbs
(130 N·m)
(140 N·m)
3.9 lbs. (1.8 kg)
WR12DMR
WR14DMR
12 V
0 – 2600 / min
1,420 in-lbs
1,720 in-lbs
(160 N·m)
(195 N·m)
3.9 lbs. (1.8 kg)
UC24YFA
7.2 – 24 V
50 min.
65 min.
70 min.
1.3 lbs. (0.6 kg)
WH18DMR
14.4 V
18 V
M6 – M14
1,330 in-lbs
(150 N·m)
4.4 lbs. (2.0 kg)
WR18DMR
14.4 V
18 V
M10 – M16
1,950 in-lbs
(220 N·m)
4.4 lbs. (2.0 kg)
UC18YG
7.2 – 18 V
50 min.
x
x
0.7 lbs. (0.3 kg)
Publicité
Table des Matières
