Ryobi TSS121 Manuel D'utilisation page 19

TABLE EXTENSIONS
See Figures 14 - 16.
Table extensions have been provided for both the left and
the right side of the saw.
To install table extensions:
 Remove the screw from the underside of the base.
 Insert the ends of extension into the holes in the sides of
the base.
 Replace screw and tighten to secure the extension in
place.
 Repeat for other extension.
TABLE
EXTENSION
BASE
ASSEMBLY
Fig. 14
19 − English
SAW VIEWED FROM BOTTOM
TABLE
BASE EXTENSION
SCREW
TABLE
EXTENSION
BASE
Fig. 15
Fig. 16