Abbreviations And Units; Key; Warranty; Important Notes - Franke AQLT0109 Mode D'emploi

1.

Abbreviations and units

DN
EA-Nr.
FAR-Best.-Nr.
Conversion
All length specifications in the graphics are in mm.
2.

Key

Warning!
Failure to observe can result in bodily injury or even death.
Caution!
Failure to observe can result in material damage.
☞
Important!
Failure to observe can cause the product to malfunction.
☞
Useful information for optimal handling of the product.
3.

Warranty

Liability is accepted in accordance with the General Terms and Conditions of
Business and Supply.
Use only genuine spare parts!
4.

Important notes

• Installation, commissioning and maintenance are to be performed only by a
qualified expert in accordance with the instructions provided, legal requirements
and recognised engineering standards.
• All technical connection regulations specified by the local water and electricity
supply companies must be observed.
• We reserve the right to make changes.
Nominal diameter in mm
European article number
Franke Aquarotter order number
1 mm = 0.03937 inches
1 inch = 25.4 mm
- 4 -