Instructions To Use - Oceanic OCEACCF32APP Guide D'utilisation

OPERATION OF YOUR FREEZER
It is recommended to install the unit in a place where the ambient
temperature is between::
Class
Extended temperate SN
Temperate
Subtropical
Tropical
If the ambient temperature is above or below the recommended
temperature, the indoor temperature may fluctuate.
Put into operation
-
Once your device is installed, wait at least 4 hours before connecting it.
-
Connect the device
-
Set the thermostat to the required temperature as indicated in the
temperature control section.
-
Leave the appliance for about 4 hours to obtain a good temperature.
Temperature control
he temperature control knob is located on the back of the unit. Set the
thermostat to the desired temperature
Setting "0": Without temperature (off)
−
−
Setting "1": Hottest temperature
−
Setting "3": Normal operation
−
Setting "5": Coldest temperature
Important
When ambient temperatures are high, for example on hot summer days,
it is necessary to set the thermostat to the coldest temperature (position 5).
Thus the compressor can operate in continuation to maintain a low
temperature in the device.
VI. INSTRUCTIONS TO USE
Symbol
N
ST
T
Average ambient temperature ° C
from + 10 to + 32
from + 16 to + 32
from + 16 to + 38
from + 16 to + 43
EN-19