Troubleshooting - Oceanic OCEACCF32APP Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Problem
The freezer does not
work
The freezer is not cold
enough
The compressor starts
and stops frequently
Vibration
The door does not close
properly
For any other problem occurring on your device: contact the After-Sales
Service.
VIII. TROUBLESHOOTING
Not connected.
Circuit breaker tripped or fuse blown
Check the temperature control setting.
The outdoor environment may require a higher
setting.
The door is open too often,
The door is not completely closed.
The door seal is not tight enough.
There is not enough space between the unit and
the walls behind and on the sides.
The temperature of the room is higher than
usual
A large amount of content has been added to
the device.
The door is open too often,
The door is not completely closed.
The temperature is not set correctly.
The door seal is not tight enough.
There is not enough space between the unit and
the walls behind and on the sides.
Check that the device is level
The device is not level.
The doors were swapped, but not installed
correctly.
The seal is dirty.
Shelves are out of place.
Possible cause
EN-27

Publicité

Chapitres

Table des Matières
loading

Table des Matières