Bosch PSR 14,4 LI-2 Notice Originale page 10

OBJ_BUCH-2360-001.book Page 10 Monday, October 20, 2014 1:49 PM
10 | English
 Apply the power tool to the screw only when it is
switched off. Rotating tool inserts can slip off.
 Adjust the gear switch only when the machine is at a
complete stop.
 If the gear switch cannot be pushed to the stop, turn
the drill chuck a little.
 When the On/Off switch is pressed halfway or com-
pletely, the battery charge-control indicator indicates
the charge condition of the battery for several sec-
onds. It consists of 3 green LEDs.
LED
Continuous lighting 3 x green
Continuous lighting 2 x green
Continuous lighting 1 x green
Slow flashing 1 x green
 The 3 LEDs of the battery charge-control indicator
flash rapidly when the battery temperature is not with-
in the operating temperature range of –30 to +65 °C,
and/or when the overload protection has responded.
To save energy, only switch the power tool on when using it.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the machine in a better and safer
manner.
Symbol Meaning
PSR 14,4 LI-2/PSR 1440 LI-2/
PSR 18 LI-2/PSR 1800 LI-2/
PSR 1810 LI-2/PSR 1820 LI-2:
Cordless Drill Driver
Grey-marked area: Handle (insulated
gripping surface)
Article number
Read all safety warnings and all instruc-
tions
Before any work on the machine itself,
remove the battery
Always wear ear protection.
Movement direction
1 609 92A 11V | (20.10.14)
Symbol
Capacity
≥ 75%
50–75%
26–50%
≤ 25%
U
n 1
0
n 2
0
M
Ø
Ø
L
wA
L
pA
K
a
h
T
1
T
2
Meaning
Reaction direction
Right/left rotation
Drilling
Screwdriving
Low speed
High speed
Switching On
Switching Off
Rated voltage
No-load speed (1. gear)
No-load speed (2. gear)
Maximum torque according to ISO 5393
Metal
Wood
Drilling diameter, max.
Max. screw dia.
Chuck clamping range
Weight according to EPTA-Procedure
01/2003
Sound power level
Sound pressure level
Uncertainty
Vibration total value
Permitted ambient temperature during
charging
Permitted ambient temperature during
operation* and storage
(* Limited performance at temperatures
<0 °C)
Recommended batteries
Recommended chargers
Bosch Power Tools