About These Instructions; Scope; Other Applicable Documents; Target Groups - Sartorius Entris II BCE Série Mode D'emploi

1 About these
Instructions
1 . 1

Scope

These instructions are part of the device . These
instructions apply to the device in the following versions:
Device Model
1) 2)
Entris BCE BCE622I-1x | BCE622-1x | BCE822I-1x |
®
precision BCE822-1x | BCE1202I-1x | BCE1202-1x |
balance with BCE2201I-1x | BCE2201-1x |
frame draft BCE2202I-1x | BCE2202-1x |
shield, BCE3202I-1x | BCE3202-1x |
readability BCE4202I-1x | BCE4202-1x |
10 mg | 0 . 1 g | BCE5201I-1x | BCE5201-1x |
1 g BCE6200I-1x | BCE6200-1x |
BCE6202I-1x | BCE6202-1x |
BCE8200I-1x | BCE8200-1x |
BCE8201I-1x | BCE8201-1x
1) Country-specific marking in model, x =
S Standard balances without country-specific
additions
SAR Standard balances with country-specific
additions for Argentina
SJP Standard balances with country-specific
additions for Japan
SKR Standard balances with country-specific
additions for South Korea
OBR Balances with approval for Brazil
OIN Balances with approval for India
OJP Balances with approval for Japan
ORU Balances with approval for Russia
CCN Balances with approval for China
CEU Conformity-assessed balances with EU type
examination certificate without country-
specific additions
CFR Conformity-assessed balances with EU type
examination certificate only for France
2) Model-typical marking in model
I-1x Devices with internal calibration and adjust-
ment function

About these Instructions

1 .2

Other Applicable Documents

In addition to these instructions, observe the following
documentation:
− Installation instructions for the accessories, e .g . printer
1 .3

Target Groups

These instructions are addressed to the following target
groups . The target groups must possess the specified
knowledge .
Target group Knowledge and qualifications
User The user is familiar with the operation of
the device and the associated work
processes . They understand the hazards
which may arise when working with the
device and know how to prevent them .
They have been trained in the operation
of the device .
Operator The operator of the device is responsible
for ensuring compliance with workplace
health and safety regulations .
The operator must ensure that all persons
who work with the device have access to
the relevant information and are trained
in working with the device .
1 .4

Symbols Used

1 .4 . 1

Warnings in Operating Instructions

WARNING
Denotes a danger with the risk that death or severe injury
may result if it is not avoided .
CAUTION
Denotes a hazard that may result in moderate or minor
injury if it is not avoided .
NOTICE
Denotes a danger with the risk that property damage may
result if it is not avoided .
Entris BCE Operating Instructions
®
5