Sartorius Entris II BCE Série Mode D'emploi page 10

Operating Concept
4 .2 . 1 Buttons
Symbol Designation
[On/Off] button
[Menu] button
[Zero] button
[Tare] button
[Print] button
[isoCAL] button
[Adjust] button
[GLP] button
[Ambient
condition] button
[Application filter]
button
[Toggle between
weight units]
button
[Back] button
[Up] button
[Down] button
10 Entris BCE Operating Instructions
®
Description
− When the button is pressed: Switches the operating display on .
− If the button is held down: Switches the operating display off .
− When the button is pressed: The settings menu opens .
− If the button is held down: It switches to version display .
Zeroes the device .
Starts taring .
Exports the readouts to the integrated data interfaces .
If the button is flashing: Starts the isoCAL function .
If the button is not flashing: Starts the set calibration and adjustment function .
Starts the set calibration and adjustment function .
− Exits the GLP printout and starts printing the GLP footer .
− If the "Net-total", "Totalizing", or "Statistics" application is active: Prints and
deletes the saved values and exits the application .
Switches between the ambient conditions "V .STABLE", "STABLE", UNSTABL ." and
"V .UNSTBL ." .
Switches between the "weighing" and "filling" application filters .
If the "Toggle between weight units" function is active:
− If the button is held down: Accesses the "Toggle between weight units" function
menu .
− When the button is pressed: Switches between the basic unit display and up to
4 other units .
− In the menu:
− When the button is pressed: Returns to the previous display .
− If the button is held down: Saves the menu settings .
− When entering digits: Selects the previous digit position .
− For an active application: Exits the application and deletes the set reference
value .
− In the menu: Scrolls through the menu levels or the available parameters .
− When entering digits: Increases the displayed value .
− In the main display of an active application: Switches to the display of the current
weight value/parameter .
− In the menu: Scrolls through the menu levels or the available parameters .
− When entering digits: Decreases the displayed value .
− In the main display of an application that is not active: Accesses the display to set
the reference values .
− In the main display of an active application: Switches to the display of the current
weight value/parameter .