Turning The Power On And Off - Sharp MX-M266N Guide De Démarrage

System settings password
A password is necessary to change the machine's system settings using
administrator authority. System settings can be changed from either the
operation panel or using a computer web browser. After setting up the machine,
refer to [SYSTEM SETTINGS] in the Operation Guide to set a new password.
Password for logging in from this machine
The factory default password for the machine is "admin".
Password for logging in from a computer
There are two accounts that can log in from a web browser: "Administrator"
and "User". The factory default passwords for each account are shown below.
Signing in as an "Administrator" will allow you to manage all the settings
available via web browser.
Account
User
Administrator
Forwarding all transmitted and
received data to the administrator
(document administration function)
This function is used to forward all data transmitted and received by
the machine to a specified destination (Scan to E-mail address, Scan to
FTP destination, Scan to Network Folder destination, or Scan to Desktop
destination).
This function can be used by the administrator of the machine to archive all
transmitted and received data.
To configure the document administration settings, click [Application Settings]
and then [Document Administration Function] in the Web page menu.
(Administrator rights are required.)
• The format, exposure, and resolution settings of transmitted
and received data remain in effect when the data is forwarded.
• When forwarding is enabled for data sent in fax mode,
• The [Direct TX] key does not appear in the touch panel.
• Quick online transmission and dialing using the speaker
cannot be used.
Points to notice when connecting to the network
When connecting the machine to the network, do not directly connect to the
internet but to the sub network (range divided by the router) in which only the
authorized device (such as PC) for the communication with the machine in
the protected LAN in some way like firewall is connected. And manage the
connected devices in the sub network so that the network condition may always
be maintained. Also use the filter setting function to prevent illegal access.
TURNING THE POWER
ON AND OFF
This machine has two power switches. The main power switch is on the left
side of the machine. The other power switch is the [POWER] key (
operation panel.
Turning on the power
1 Switch the main power switch to the "
2 Press the [POWER] key (
Turning off the power
1 Press the [POWER] key (
2 Switch the main power switch to the "
• If the main power indicator is blinking, press the [POWER] key
( ) after it becomes steadily lit.
• When turning off the power, make sure that the indicator lights
on the operation panel turn off as well.
• In the event of a power failure or other reason that causes the
machine to suddenly turn off, turn back on the power of the
machine and then proceed to turn off the machine following the
correct procedures.
Switching off the main power switch or removing the power
cord from the outlet while any of the indicators are lit or blinking
may damage the hard drive and cause data to be lost.
• Switch off both the [POWER] key (
switch and unplug the power cord if you suspect a machine
failure, if there is a bad thunderstorm nearby, or when you are
moving the machine.
When using the fax or Internet fax function, always keep the main
power switch in the "on" position.
Password
users users
admin admin
) on the
" position.
) to turn on the power.
) to turn off the power.
" position.
) and the main power
Restarting the machine
In order for some settings to take effect, the machine must be restarted.
If a message in the touch panel prompts you to restart the machine, press the
[POWER] key ( ) to turn off the power and then press the key again to turn the
power back on.
In some states of the machine, pressing the [POWER] key (
restart will not make the settings take effect. In this case, use the
main power switch to switch the power off and then on.
SPECIFICATIONS
Basic Specifications /
Copier specifications
Model MX-M266N/MX-M316N
Desktop
Type
Monochrome
Colour
Laser electrostatic copier
Copier system
Scan (RSPF): 600 × 600 dpi, 600 × 400 dpi
Scan (Document glass):
Resolution
Print:
Gradation Scan: 256 levels / Print: equivalent to 256 levels
Original paper
Max. A3 (11"×17") / sheets, bound documents
sizes
A3 to A5R (11"×17" to 5-1/2" × 8-1/2"R), Envelopes
Tray 1-4: A3, B4, A4, A4R, B5, B5R, A5R, 11"×17",
8-1/2"×14", 8-1/2"×13-1/2", 8-1/2"×13-2/5", 8-1/2"×13",
8-1/2"×11", 8-1/2"×11"R, 5-1/2"×8-1/2"R
Multi-bypass tray: A3 (11"×17") to A5R, Envelopes, Custom
Copy sizes
Lost margin
Leading edge: 1 mm to 4 mm (3/64" to 11/64")
Trailing edge: 1 mm to 5 mm (3/64" to 13/64") or less
Left edge / Right edge: total 6 mm (1/4") or less
Tray 1-4:
Multi-bypass tray: Plain paper, Heavy paper, Thin paper,
Paper type
20 seconds
Warm-up time
 This may vary depending on the ambient conditions.
4.3 seconds
First-copy time
 This may vary depending on the state of the machine.
 Portrait feeding of A4 (8-1/2" x 11") sheets.
11"×17"
A3
B4, 8-1/2"×14",
8-1/2"×13",
8-1/2"×13-1/2",
8-1/2"×13-2/5"
Continuous
A4R,
copying speeds*
8-1/2"×11"R
B5R
A4, B5, A5R,
8-1/2"×11",
5-1/2"×8-1/2"R
* Continuous speed for same original source. Output may be
temporarily interrupted to stabilize image quality.
Same size:
Enlarge:
Reduce:
Copy ratios
Zoom range: 25 to 400 % (25 - 200 % using RSPF) in 1 %
Paper feed / 1,000 sheets in two tray plus 100-sheet multi-bypass tray
 Using 80 g/m
capacity
2,000 sheets in four tray plus 100-sheet multi-bypass tray
Max. paper feed /
 Using 80 g/m
max. capacity
Continuous copy Max. 999 copies
Standard: 2 GB
Memory  1 GB = One billion bytes when referring to hard drive
apacity. Actual format capacity is less.
Operating
environment
Ambient
environment
Standard
environment
Local voltage ± 10 % (For the power supply requirements, see
Required power the name plate on the left side of the machine.)
Power consumption Max. 1.45 kW (220-240 V)
supply
(including options such as drawers)
620 mm (W) × 617 mm (D) × 830 mm (H)
Dimensions
(24-27/64" (W) × 24-19/64" (D) × 32-11/16" (H))
Weight Approx. 51 kg (112.4 lbs.)
938 mm (W) × 617 mm (D) (36-15/16" (W) × 24-19/64" (D))
Overall
(With multi-bypass tray and output tray extension extended,
dimensions
also with operation panel tilted at the maximum angle)
5
600 × 600 dpi, 600 × 400 dpi, 600 × 300 dpi
600 × 600 dpi, equivalent to 1,200 dpi × 600 dpi
Plain paper, Thin paper
Special paper (Envelopes, Label,
Transparency film)
MX-M266N MX-M316N
14 copies/min. 17 copies/min.
15 copies/min. 17 copies/min.
16 copies/min. 20 copies/min.
18 copies/min. 24 copies/min.
21 copies/min. 24 copies/min.
26 copies/min. 31 copies/min.
1:1 ± 0.8 %
115 %, 122 %, 141 %, 200 %, 400 %
25 % 50 %, 70 %, 81 %, 86 %
increments, total 376 increments.
(21 lbs.) weight paper
2
(21 lbs.) weight paper
2
10 °C (54 °F) to 35 °C (91 °F)
(20 % to 85 % RH) 590 - 1,013 hPa
20 °C (68 °F) to 25 °C (77 °F)
(65 ± 5 % RH)
) to