Displaying System Version Of Bluetooth Adapter For Repair - Pioneer DEH-P3100UB Mode D'emploi

Section
04 Initial Settings
1 Use MULTI-CONTROL to select
PIN CODE INPUT in the initial setting menu.
Refer to Adjusting initial settings on page 26.
2 Press MULTI-CONTROL to display the
setting mode.
# Press DISP/BACK/SCRL to return to the pre-
vious display.
3 Turn MULTI-CONTROL to select a num-
ber.
# You can also perform the same operations by
pushing MULTI-CONTROL up or down.
4 Press MULTI-CONTROL to move the cur-
sor to the next position.
# You can also perform the same operations by
pushing MULTI-CONTROL right.
5 After inputting PIN code (up to 16 di-
gits), press and hold MULTI-CONTROL.
PIN code can be stored in memory.
Displaying system version of
Bluetooth adapter for repair
Should this unit connecting Bluetooth adapter
fails to operate properly and you consult your
dealer for repair, you may be asked to indicate
the system version and Bluetooth module ver-
sion of the adapter. You can display the ver-
sions and confirm them.
! You can only operate this function when
Bluetooth adapter (e.g. CD-BTB200) is con-
nected to this unit.
1 Use MULTI-CONTROL to select
BT VER INFO in the initial setting menu.
Refer to Adjusting initial settings on page 26.
2 Press MULTI-CONTROL to display the
setting mode.
# Press DISP/BACK/SCRL to return to the pre-
vious display.
3 Use MULTI-CONTROL to select the de-
sired version.
Turn to switch the version.
28
En
System version—Bluetooth module ver-
sion
# You can also perform the same operations by
pushing MULTI-CONTROL up or down.