Product Description And Specifications - Bosch GBG 6 Professional Notice Originale

OBJ_BUCH-1501-004.book Page 13 Tuesday, September 30, 2014 11:17 AM
Symbols
The following symbols can be important for the operation of
your power tool. Please memorise the symbols and their
meanings. The correct interpretation of the symbols helps
you operate the power tool better and more secure.
Symbols and their meaning
Keep your hands out of the grinding
wheel area while the machine is running.
Danger of injury in case of contact with the
grinding wheel.
Wear ear protectors. Exposure to noise
can cause hearing loss.
Wear safety goggles.
Wear a dust respirator.
Wear protective gloves.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for sharpening tools as well as for
grinding and deburring metal.
The machine may only be used for short-time operation
(60 min. max).
Bosch Power Tools
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Cover
2 Clamping nut
3 Clamping flange
4 Mounting flange(GBG 6: two-part; GBG 8: one-part)
5 Grinder spindle
6 Blade guard
7 Mounting holes
8 On/Off switch
9 Holder for the spark guard
10 Spark guard
11 Workpiece support
12 Open-end spanner
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
Noise Information
Sound emission values determined according to
EN 61029-2-4.
Typically the A-weighted sound pressure level of the product
is less than 70 dB(A). Uncertainty K =3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2011/65/EU, 2014/30/EU,
2006/42/EC including their amendments and complies with
the following standards: EN 61029-1, EN 61029-2-4.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen, GERMANY
Henk Becker Helmut Heinzelmann
Executive Vice President Head of Product Certification
Engineering PT/ETM9
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
Leinfelden, 30.09.2014
English | 13
1 609 92A 0XY | (30.9.14)