Care & Cleaning; Washing Instructions - Panasonic CS-PA18JKD Guide Rapide

CARE & CLEANING CARE & CLEANING
• Switch off the power supply and unplug before cleaning.
• Do not touch the aluminium fi n, sharp parts may cause injury.
CAUTION

WASHING INSTRUCTIONS

WASHING INSTRUCTIONS
• Do not use benzene, thinner or scouring powder.
• Use only soap ( pH7) or neutral household detergent.
• Do not use water hotter than 40°C.
ALUMINIUM FIN ALUMINIUM FIN
AIR FILTERS AIR FILTERS
• Air filters cleaning is needed every two weeks.
• Wash/rinse the fi lter gently with water to avoid
damage to the fi lter surface.
• Dry the fi lters thoroughly under the shade, away from
fi re or direct sunlight.
• Replace any damaged fi lter.
FOR SEASONAL INSPECTION AFTER EXTENDED FOR SEASONAL INSPECTION AFTER EXTENDED
NON-USE NON-USE
• Checking of remote control batteries.
• No obstruction at air inlet and air outlet vents.
• After 15 minutes of operation, it is normal to have the
following temperature difference between air inlet and air
outlet vents:
Cooling: ≥ 8°C
FOR EXTENDED NON-USE FOR EXTENDED NON-USE
• Activate heat mode for 2~3 hours to remove moisture left in
the internal parts thoroughly.
• Turn off the power supply and unplug.
• Remove the remote control batteries.
6
Remove Remove
Heating: ≥ 14°C
HINT HINT
• To ensure optimal performance of the unit, cleaning
maintenance have to be carried out at regular intervals.
Please consult authorized dealer.
FRONT PANEL FRONT PANEL
Remove Front Panel
• Raise and pull to remove the
• Wash gently and dry.
Close Front Panel
• Press down both ends of the
INDOOR UNIT INDOOR UNIT
Wipe the unit gently with a soft,
dry cloth.
NON SERVICEABLE CRITERIAS NON SERVICEABLE CRITERIAS
TURN OFF POWER SUPPLY AND UNPLUG then please
consult authorized dealer under the following conditions:
• Abnormal noise during operation.
• Water/foreign particles have entered the remote control.
• Water leaks from Indoor unit.
• Circuit breaker switches off frequently.
• Power cord becomes unnaturally warm.
• Switches or buttons are not functioning properly.
• Timer indicator blinks.
front panel.
front panel to close it securely.