Installation; General Considerations; Levelling Of The Appliance; Circulation Of Ducted Air - Palazzetti Isabel 9 US Manuel D'installation, D'utilisation Et De Maintenance

7

INSTALLATION

7.1

General considerations

In the following paragraphs some indications
are provided to be respected in order to obtain
the maximum performance from the purchased
product.
The following indications are how-
ever subject to compliance with any
possible national, regional and mu-
nicipal laws and regulations in force
in the country where the appliance is
installed.

7.2 Levelling of the appliance

The appliance must be levelled with the help of a
spirit level, by regulating the adjustable feet (Fig.
21).
A = Spirit level.
A

7.3 Circulation of ducted air

The stove is designed for ductable rear hot air
connection.
In order to connect the stove to a ducted heating
system, the rear fan (A) must be connected to a
pipe with diameter 80 mm (B) on one side and
the air distribution vent (C) on the other. Secure
with 80 mm diameter hose clamp.
When the stove is used to heat two or more
adjacent rooms, it is essential to encourage
recirculation of the ambient air to uniform the
temperature in the various rooms.
66
For air ducting, preferably use smooth,
internally insulated pipes.
7.3.1 PRO 2
TA
Room thermostat for rear fan control (PRO 2)
It is possible to connect a room thermostat to
the terminal board of the stove so that the rear
fan can be switched on and off according to the
temperature set on the thermostat.
To use this function, rear fan ventilation must be
Fig. 21
set to ON.
The thermostat that controls the rear fan must
be connected to terminals 5 and 6 of the terminal
board in place of the bridge.
C
A
B
004778680 - 25/02/2021
Fig. 22