Configuration Of The Temperature Transmitters Or Resistance Thermometers Models; Maintenance - WIKA PU-548 Mode D'emploi

9. Configuration of the ... / 10. Maintenance
9. Configuration of the temperature transmitters or
resistance thermometers models T15, T16, T24,
TR21, TR30, TR31, TR33, TR34
EN

10. Maintenance

The programming unit described here is maintenance-free!
The electronics incorporate no components which could be repaired or
replaced.
16
Do not configure the transmitter, nor the resistance
thermometer with the PU-548 programming adapter and
PC in hazardous areas!
Through proper tightening the connection terminals,
communication errors can be avoided.
Isolate the transmitter from the external/additional power
supply before connection of the PU-548.
For further information and advice see the appropriate
operating instructions.
For installation please follow the instructions of the
installation routine. Free download of the current version
of the WIKAsoft-TT software at www.wika.com. It can only
ever be used in connection with a single instrument. Start
the software by double-clicking on the WIKAsoft-TT icon.
During data transfer, do not break the connection with the
transmitter, since the data may not be correctly read as a
result of this.
WIKA operating instructions programming unit PU-548