T-Fal P26106 Guide D'utilisation page 11

Never use a sharp or
pointed object to do
this.
You must have your
pressure cooker
checked in a T-FAL
Approved Service
Center after 10 years
of use.
Safety
Your pressure cooker is fitted with several safety
devices:
• Closing safety:
- If the appliance is not closed properly, the
pressure indicator (D) cannot rise and as a result
the pressure cooker cannot be put under
pressure.
• Opening safety:
- If the pressure cooker is under pressure, the
opening button (E) cannot be pressed. Never
force the pressure cooker open. Above all do not
interfere with the pressure indicator (D).
• Two safety devices against overpressure:
- First device: the safety device (C) releases the
pressure and steam escapes horizontally from
above the lid - fig. 14.
- Second device: the seal (I) allows steam to
escape vertically along the pan -
If one of the overpressure safety systems is
triggered:
• Turn off the heat source.
• Let the pressure cooker cool down completely.
To clean the safety valve (C):
• Clean the part of the safety valve located inside
the lid by placing it under running water.
• Check its proper operation by slightly pressing
down on the pin, which must sink without
difficulty - fig. 13.
To change the seal of your pressure cooker:
• Change the seal of your pressure cooker every year
or if it has any cuts.
• Always use an original T-FAL seal suitable for your
model.
To store your pressure cooker:
• Turn the lid over on the pan.
fig. 15.
EN
8