Lumilight Led - Zephyr Pisa ZPI-E24BG Guide D'utilisation, D'entretien Et D'installation

ZEPHYRONLINE.COM
Removing Aluminum Mesh Filters
1. Push in filter latch.
2. Tilt filter down and remove from hood.
Replacing Aluminum Mesh Filters
Hood Model
ZPI
To order parts, visit us online at http://store.zephyronline.com.

LumiLight LED

In the unlikely event that your LumiLight LED fails, please contact Zephyr to order replacement parts.
See the list of parts and accessories page for part numbers and contact information.
LED Removal (FIG. F):
1. Remove aluminum mesh filter.
2. Remove side panels if applicable, and remove
light panels by two screws.
3. Disconnect LED light quick connector.
4. Push in the two side clips on the ends of the
LED light.
5. Push LED light through the light panel opening.
Pisa Use, Care, and Installation Guide
Part Number
50200054
Maintenance
Quantity to Order
1
Push the clip
FIG. F
23