Zephyr Pisa ZPI-E24BG Guide D'utilisation, D'entretien Et D'installation page 17

ZEPHYRONLINE.COM
Mounting the Hood
Pisa Use, Care, and Installation Guide
A
Installation Instructions
6. 24" Models Only. From inside the hood,
secure (1) M4x8 screw into each lower
installation bracket. The position of this
screw is adjustable to accommodate
various cabinet bottom thicknesses.
7. 24" Models Only. Install (2) 3/16x40
screws into the captive nuts of each
upper installation bracket. Tighten
screws to adjust the height of the range
hood until there is no gap between the
cabinet and front edge of the hood.
8. 30" & 36" Models Only. Secure hood
body to cabinet base by (4) M4 x 16mm
screws through the bottom of range
hood.
9. Secure (2) 1" wood screws (A) into the
screw holes on the left and right sides of
the filter opening.
17