Bestron A2000EZ Mode D'emploi page 28

• Never immerse the appliance, plug or power cord in water.
• N ever use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
cleAning And MAintenAnce
1. Remove the plug from the wall socket.
Figure 10
2. Remove the hose.
3. R emove the dust receptacle by pressing the release button on the dust receptacle (see Figure 10) and
pulling on the receptacle, and hold it above a waste-bin.
Figure 11
4. Press the button in the handle to open the bottom flap (see Figure 11).
5. If so required, use your hand to remove any waste sticking to the receptacle.
6. Close the bottom flap, and press until it clicks into place.
7. Fit the dust receptacle onto the appliance, and click it into position.
cleAning And MAintenAnce
For best results clean or replace the filter after every second or third use of the vacuum cleaner, or more
frequently if the filter is visibly blocked.
Clean the filter regularly to avoid that the filter becomes clogged and the engine overheated.
1. Remove the waste from the dust receptacle (see "Removing waste from the dust receptacle").
A B
Figure 12 Removing the filter
removing waste from the dust receptacle
-
Removing waste from the dust receptacle
cleaning or replacing the filter
-
C D
28
instruction manual