Publicité
Les langues disponibles
Les langues disponibles
supply plug or car cigarette lighter. Batteries will be
permanently disabled or damaged.
• Charge only MILWAUKEE M18™ Lithium-Ion
packs. Other types of batteries may burst causing
personal injury or damage.
• Avoid dangerous environments. Do not charge bat-
tery pack in rain, snow, damp or wet locations. Do not
use battery pack or charger in the presence of explo-
sive atmospheres (gaseous fumes, dust or flammable
materials) because sparks may be generated when in-
serting or removing battery pack, possibly causing fire.
• Charge in a well ventilated area. Do not allow
smoking or open flames near a charging battery
pack. Vented gases may explode.
• Maintain charger cord. When unplugging char-
ger, pull plug rather than cord to reduce the risk of
damage to the electrical plug and cord. Never carry
charger by its cord. Keep cord from heat, oil and
sharp edges. Make sure cord will not be stepped on,
tripped over or subjected to damage or stress. Do
not use charger with damaged cord or plug. Have a
damaged charger replaced immediately.
• Use only recommended attachments. Use of an
attachment not recommended or sold by the battery
charger or battery pack manufacturer may result in a
risk of fire, electric shock or personal injury.
• Unplug charger when not in use. Remove battery
packs from unplugged chargers.
• To reduce the risk of electric shock, always unplug
charger before cleaning or maintenance. Do not allow
water to flow into AC/DC plug. Use a Ground Fault
Circuit Interrupter (GFCI) to reduce shock hazards.
• Store your battery and charger in a cool, dry place.
Do not store battery pack where temperatures may
exceed 120°F (50°C) such as in direct sunlight, a
vehicle or metal building during the summer.
SERVICE
• Have your light serviced by a qualified repair per-
son using only identical replacement parts. This
will ensure that the safety of the light is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY
RULES FOR
LIGHTS
• Warning - The lens may get hot during use. To
reduce the risk of burns, do not touch hot lens.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
SAVE THESE
INSTRUCTIONS
FUNCTIONAL
DESCRIPTION
1
1. MODE button
2. Power button
3. Brightness button
4. Charger indicators
5. Battery bay
6. Handle
7. AC input
8. USB power outlet
9. USB power button
10. Storage compartment
SYMBOLOGY
Volts
Direct Current
Alternating Current
Amps
Hertz
Do not stare at the operating light
source.
Double insulated
Do not step or stand.
AC Power
Universal Serial Bus (USB)
USB power button
UL Listing for Canada and U.S.
US
C
3
2
3
9
10
4
5
6
7
8
Publicité
