Video Door Phone Installation; Description Of Terminal Board - Urmet 956/81 Manuel D'installation Et D'utilisation

6.1

VIDEO DOOR PHONE INSTALLATION

Proceed as shown below to install the video door phone. Use the screws and anchor bolts provided to fix
the bracket.
It is advisable to position the upper part of the bracket at approximately 1.55 m from the ground.
There must be a minimum distance of 5 cm between video door phone and the closest object.
Holes and fastening screws
Extractable terminal board for facilitated wiring: power connection,
Bracket
door unit and electric lock
Arrange the duct so that it ends at the terminal board on the back of the video door phone
Fix the video door phone on the specific
fasteners
6.2

DESCRIPTION OF TERMINAL BOARD

-V
Power voltage input from dedicated power unit (respect the polarity)
+V
L1
Terminals for connecting video door phone to door unit
L2
S1
Terminals for connecting a second video door phone (Slave)
S2
X1
No-voltage contact for supplementary service actuation (max. switch
X2
LBT20005
Video door phone coupling seats
Installation completion
1A @ 30V)
21