Replacing Main Burners - Weber Summit 56214 Guide De L'utilisateur

replaCinG main burners

A) Your Summit gas grill must be off and cool .
®
B) Turn gas off at source .
C) Disconnect gas supply .
D) Remove cooking grates .
E) Remove Flavorizer ® bars .
F) Remove smoker box (if included in your model) .
remove Control panel
Parts required: Phillips screwdriver and a towel .
A) Remove the burner control knobs (1) .
B) Open both doors and place a towel on top of the doors .
This will protect the control panel and tops of the doors from getting scratched on
the next step .
C) Remove the screws from the underside of the control panel with a Phillips
screwdriver (2) .
D) Tilt the conrol panel forward and lift up and away from the grill (3) (For Summit
models with LED features: Be careful not to break or disconnect the wires for the
control panel LED's) .
E) Place the control panel on the towel covering the door assemblies (4) .
2
F) Remove the two screws that secure the manifold to the cookbox . Pull manifold
assembly out from the manifold frame (5) .
G) Pull the selected burner(s) tube(s) from manifold frame and replace with a new
burner tube (6) .
mAINTENANcE
®
the grill illustrated may
have slight differences than
the model purchased.
3
6 7
1
4
6
5
WWW.WEbER.com
® 25