Drying; Storage; Troubleshooting - Pari LC SPRINT Mode D'emploi

4.6 Drying

After each cleaning and disinfection, place all product compon-
ents on a dry, clean and absorbent surface and let them dry
completely.

4.7 Storage

Store this product as described below:
• Wrap all individual components in a clean, lint-free cloth
(e.g., a tea towel).
• Store this product in a dry, dust-free place.
5

TROUBLESHOOTING

Fault
No aerosol is
coming out of
the nebuliser.
– 25 –
Possible cause
The nebuliser nozzle
attachment is
blocked.
The connection
tubing is not connec-
ted properly.
The connection
tubing is leaking.
Remedy
Clean the nebuliser.
Check that the tubing con-
nectors are connected firmly
to the compressor and the
nebuliser.
Replace the connection
tubing.