Seat - Yamaha BRUIN 250 Manuel Du Propriétaire

1. Seat

1. Selle
1. Asiento
1. Projection (× 2)
1. Saillie (× 2)
1. Saliente (× 2)
2. Seat lock lever
2. Levier de verrouillage de la selle
2. Palanca de bloqueo del asiento
2. Seat holder (× 2)
2. Support de selle (× 2)
2. Soporte del asiento (× 2)
Seat
To remove the seat, pull the seat lock lever up-
ward and pull up the seat at the rear.
To install the seat, insert the projections on the
front of the seat into the seat holders and push
down on the seat at the rear.
NOTE:
_
Make sure that the seat is securely fitted.
_
4-27
EBU05670