Various Machine Modes - Husqvarna PG450 Manuel D'utilisation

Masquer les pouces Voir aussi pour PG450:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Make sure that the brush list is intact and clean and
that it seals tightly against the floor. Damaged brush
list should always be replaced.
The tool plate continues to rotate for a while after the
motor has been switched off. Maintain grinding action
until the fan has come to a complete stop. Ensure the
tool plate has stopped rotating before lifting up the
machine.
When grinding adhesive, asphalt, paint or the like, lift
the front of the machine slightly after use to prevent it
sticking to the floor from the heat. Ensure the tool
plate has stopped rotating before lifting up the
machine.
Diamond tools may be very hot after use. Leave
machine to cool off before removing the diamond
segments. Use protective gloves.
Always use the machine mounted lifting eye when
lifting.
Always carry the machine by the carrying handle and
the handle.
OPERATING

Various machine modes

Operating position
Service position
Tilting transportation position
Lifting transportation position
Put padding between the motor and the electrical cabinet
to prevent damage to the machine.
English
9

Publicité

Table des Matières
loading

Table des Matières