Cleaning And Maintenance; General Maintenance; Grease Filter - Novy Flat'line 7600 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3 CLEANING AND MAINTENANCE


Follow all instructions as described in the Con-
ditions for Safety and Use section.

Follow the cleaning instructions below for a
longer working life and optimal operation of the
appliance.

3.1 General maintenance


Allow the lighting to cool down suffi ciently be-
fore you start cleaning the extractor hood.

Never use aggressive, abrasive or chlorinated
products.

Do not use a high pressure or steam cleaner.
Stainless steel
Clean with a cleansing tissue with mild cleaning agent
then dry with a soft cloth. Maintenance of the stainless
steel can be performed with the Novy cleaner (906060).
Coated parts of the extractor hood
The extractor hood can be cleaned with a damp cleansing
tissue and a mild cleaning agent.
Glass
Glass parts of the extractor hood can be cleaned with
a soft cloth and a glass cleaner.
3.2 Grease fi lter

If the following instructions are not carried out,
serious soiling can cause a fi re hazard.
Indication cleaning grease fi lter
Indication: 4 fl ashing indicator lights
After 20 cooking hours 4 fl ashing indicator LEDs show
that the grease fi lter must be cleaned.
Reset the cleaning indicator
When you replace the grease fi lter after clean-
ing, it is suffi cient to press the
seconds to again set the indicator.
If you do not do this the indicator light will continue to fl ash
when switching on the extractor hood.
Accessing the grease fi lter
The grease fi lter can be removed by grasping the bottom
plate on the left and right with both hands and pulling it
downwards. The grease fi lter can now be removed by
pushing the lock or pulling the lip attached to the fi lter.
Cleaning the grease fi lter
The metal grease fi lter can be cleaned by hand or in a dish-
washer. We recommend cleaning the grease fi lter by hand.
Cleaning the fi lter by hand:
− Immerse the fi lter in a solution of boiling water to which
a degreasing detergent has been added.
− Use a brush for cleaning
− Then rinse the fi lters with warm water under a tap and
allow them to dry.
Cleaning the fi lter in a dishwasher:
When cleaning in a dishwasher the fi lter may discolour as a
result of the salt content. This does not affect its operation.
− Use a customary dishwasher detergent
− Do not put the saturated grease fi lters together with
crockery in the dishwasher
− Select a programme with a low temperature
− After cleaning allow the fi lter to drain.
Replacing the grease fi lters
− Before replacing the grease fi lter, clean the edges of the
part in the extractor hood in which the fi lter is placed.
− Grasp the fi lter with 2 hands.
− Make sure that the lock or the lip on the fi lter is on the
bottom side.
− Insert the back of the fi lter in the opening, press the fi lter
upwards at the front and make sure it clicks tight.
You can obtain a new grease fi lter from a dealer
or the Novy website. Article number grease
fi lter: 7400020.
3.3 Monoblock recircuilatiefi lter (optioneel)
If recirculation is chosen the appliance is connected to an
outlet box with a monobloc recirculation fi lter, or a monob-
loc recirculation fi lter is fi tted in the extractor hood behind
the grease fi lter.
– 31 –
key for 5
2

Publicité

Table des Matières
loading

Table des Matières