Publicité
Les langues disponibles
Les langues disponibles
2.5 Remote control
➀ Lighting (if extra lighting
is connected)
➁ Increase speed levels
➂ Decrease speed levels
➃ Switch on / off
➄ Novy button: not applicable
The remote control for hood is preinstalled and ready for use.
Change the code on the remote control
If the set code disrupts other transmitters, another code
can be selected using the remote control. There are 10
different codes.
Determine the code used
Simultaneously press
and
control fl ashes as many times as the selected code (there
are 10 code options in total).
Change the code
− Simultaneously press and
− The green light on the remote control fl ashes as many
times as the selected code. If another code is required
repeat this step again (1x fl ashing is code 1, 2x fl ashing
is code 2 etc. There are total of 10 codes).
− Simultaneously press on the cookerhood
until the second green Speed indicator lamp is blinking.`
− Press the key
on the remote control within 10 seconds
to confi rm the settings. The cooker hood and the remote
control are now in line with each other.
. The lamp on the remote
and
.
and
2.6 InTouch
The extraction hood has the InTouch function. If you
have an induction hob from Novy with InTouch, you can
operate the extraction hood from the hob. There is also
the option that the extraction hood can be operated with
a remote control.
Programming InTouch on the induction plate
The remote control must fi rst work with the hood. If ne-
cessary, the remote control code can be changed, as
described in Section 2.5
− Connect the plate to the mains supply.
− Touch simultaneously the keys
plate until you hear a beep signal (prox. 7 sec.).
− The cooker plate now searches automatically for the
hood code.
− Wait until the cooker hood illumination begins to fl ashing
OR you hear a "click" sound when you have an extractor
hood without lighting (Be patient, this can betake a while).
− Does the light blink or you hear the "click" sound; press
immediately on any InTouch key or
on the induction hob.
− You will hear a "beep" signal to indicate the link between
the two devices.
Now you can operate the hood with the keys on the
induction plate.
You can fi nd more information about using the InTouch
functions in the InTouch manual for the hob or remote control.
Turning the InTouch function on and off
The InTouch function is on by default. Turning
off the InTouch function on the cooker hood
results in the connection between cooker hood
and Novy induction hob with InTouch and/or
remote control is also disabled.
To switch the InTouch function off press the
keys at the same time for 3 seconds and the 2nd and 4th
LEDs fl ash 3 times to confi rm. (The appliance must be
switched off).
switched off).
The function can be switched on by pressing the
keys at the same time for 3 seconds.
3
The 2nd and 3rd LEDs fl ash 3 times to confi rm (the appli-
ance must be switched off).
– 37 –
and
on the induction
or
or
or
1
and
2
1
and
Publicité
Chapitres
