Sony HVL-F60M Mode D'emploi page 73

6
After finishing your changes, press the center of the
control wheel to set the values and return to the normal
indicator screen.
• Make sure that the wireless channel of the off-camera flash is set to the
same channel as the controller. For details on setting the wireless channel,
see "MENU settings" (page 88).
• When using the flash unit as a wireless flash, you can set it to beep when
charging is complete and when metering is complete. (Time until charging
is complete: about 0.6 seconds, time until metering is complete: about 0.1
seconds) For more details, see "Setting the beep function in wireless remote
mode [BEEP]" in "MENU settings" (page 92).
73
GB