Sony HVL-F60M Mode D'emploi page 31

Flash
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4
When the flash unit is charged, press the shutter
button to take a photo.
• The flash unit is fully charged when the TEST button on the control panel is
lit in amber.
When the correct exposure has been obtained for the photo just taken, the
TEST button on the control panel blinks in green.
• The photo will be under-exposed because of a lack of luminescence if taken
before charging is complete.
• Press the shutter button after making sure that charging is complete when using
the flash unit with the self-timer.
• The flash mode selected (auto flash ([TTL AUTO]), fill-flash ([TTL]), or flash
off (
mode)) depends on your camera. For details, refer to the operating
instructions of your camera.
31
GB

Publicité

Chapitres

Table des Matières
loading

Table des Matières