Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Using the bounce adaptor
Fitting the supplied bounce adaptor lets you diffuse the light from the flash over a
wider range, producing a softer light and reducing shadows.
Attaching the bounce adaptor
Fit the bounce adaptor in the direction of the arrow in illustration, aligning the clips
on the bounce adaptor with the grooves in the flash unit.
• Hold the bounce adaptor with its cut away part at the top, as illustrated below,
and check its orientation with the flashtube before firmly fitting them together.
Insufficient attachment may prevent accurate metering.
52
GB
OK
Publicité
Chapitres
Table des Matières
