Saey 94 Notice D'installation Et D'utilisation page 37

S S 94 / S 94 T
AEY AEY AEY OP
Cleaning the glass
The SAEY airwash-system keeps the glass of the stove clean for a longer period of time. However, blackening of the
window surface cannot be prevented in the long-term. The use of damp or wet wood aggravates this effect.
ATTENTION!
The window surface can be cleaned as follows:
1. Place a slightly damp piece of newspaper or rag in the white ashes of the cool appliance and rub this on the glass.
The ashes have a gently scouring effect.
2. Now rub the window surface with another damp piece of newspaper or rag. Finally polish the glass with a clean
dry soft cloth.
There are also special cleaning products for fireplace glass. Be careful with these products because some may damage
the heat resistant paint of the appliance. Follow the instructions of the cleaning product carefully.
ATTENTION!
By applying the following tips and tricks you can prevent damage to the glass.
• Don't let burning logs pass the log grid.
• When filling wood prevent logs from falling against the glass.
• Don't put too much pressure on the glass during cleaning.
If the glass breaks, then please consult your dealer.
Before and after the heating season
After the heating season (i.e. during the summer months) it's recommended to remove or seal the flue pipe between
the stove and chimney in order to prevent condensation and/or corrosion in the stove. This increases the lifetime of
your stove.
We also recommended to decrease the tension of the screws on the glass by using a screwdriver prior to the first use
of your stove after a period of disuse. A such you will increase the lifetime of the glass and avoid possible cracks.
The appliance must be cooled down prior to cleaning the glass.
Never use 'scouring' cleaning products, they can damage the protective layer of the glass
and cause it to crack.
ENGLISH
37
02042012– v01