Makita DHR182 Manuel D'instructions page 8

Rotation only
For drilling in wood, metal or plastic materials, rotate
the action mode changing knob to the
twist drill bit or wood drill bit.
► 1. Rotation only
Hammering only
For chipping, scaling or demolition operations, rotate
the action mode changing knob to the
bull point, cold chisel, scaling chisel, etc.
1
► 1. Hammering only
Adjusting the nozzle position of the
dust collection system
symbol. Use a
Optional accessory
Push in the guide while pushing up the guide adjust-
1
ment button, and then release the button at the desired
position.
symbol. Use a
► 1. Guide 2. Guide adjustment button
NOTE: Before adjusting the nozzle position, release
the nozzle forward completely by pushing up the
guide adjustment button.
Adjusting the drilling depth of the
dust collection system
Optional accessory
Slide the depth adjustment button to the desired posi-
tion while pushing it up. The distance (A) is the drilling
depth.
► 1. Depth adjustment button
8 ENGLISH
1
2
1
A