GE AEV05 Série Manuel D'utilisation Et Instructions D'installation page 5

Features and appearance will vary.
Controls (on some models)
Mode Control
High Cool and Low Cool provide cooling with
different fan speeds.
Fan settings provide air circulation and filtering
without cooling.
NOTE: If you move the mode control from a cool
setting to OFF or to a fan setting, wait at least
3 minutes before switching back to a cool
setting.
Cooling Descriptions
Cool with the TEMPERATURE control at midpoint.
For Maximum Cooling
the TEMPERATURE control at the highest number
available on your knob.
For Quieter and Nighttime Cooling
Cool with the TEMPERATURE control at midpoint.
MODE CONTROL
Select High Cool or Low
High Cool with
TEMPERATURE CONTROL
TEMP Control
The TEMP control is used to maintain the room
temperature. The compressor will cycle on
and off to keep the room at the same level of
comfort. When you turn the knob to a higher
number, the indoor air will become cooler. Turn
the knob to a lower number and the indoor air
will become warmer.
Low
GEAppliances.com
5