Warnings & Cautions - Focusrite ISA 828 Mode D'emploi

WARNINGS & CAUTIONS
THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING, AND NO OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS
VENTILATION SHALL NOT BE IMPEDED BY COVERING THE VENTILATION OPENINGS WITH ITEMS, SUCH AS
NEWSPAPERS, CLOTHS, CURTAINS ETC.
NO NAKED FLAME SOURCES, SUCH AS LIGHTED CANDLES, SHOULD BE PLACED ON THE APPARATUS
MAINS LEAD - THIS EQUIPMENT MUST BE EARTHED AND FITTED WITH THE CORRECT LEAD FOR THE COUNTRY
OF OPERATION. THIS WILL NORMALLY BE ACHIEVED FROM THE CORRECT MAINS SUPPLY SOCKET
DO NOT USE A DAMAGED OR FRAYED POWER CORD
IF THE MAINS PLUG SUPPLYING THIS APPARATUS INCORPORATES A FUSE THEN IT SHOULD ONLY BE REPLACED
WITH A FUSE OF IDENTICAL OR LOWER RUPTURE VALUE
SHOULD THE APPARATUS OR SUPPLY CORD BECOME PHYSICALLY DAMAGED THEN IT SHOULD NOT BE POWERED,
AND ADVICE SOUGHT FROM SUITABLY QUALIFIED PERSONNEL
THIS UNIT MUST BE EARTHED BY THE POWER CORD
UNDER NO CIRCUMSTANCES SHOULD THE MAINS EARTH BE DISCONNECTED FROM THE MAINS LEAD
This unit is capable of operating over a range of mains voltages as marked on the rear panel. Ensure correct mains
voltage setting and correct fuse before connecting mains supply. Do not change mains voltage settings while mains
supply is connected. To avoid the risk of fire, replace the mains fuse only with the correct value fuse, as marked on the
rear panel. The internal power supply unit contains no user serviceable parts. Refer all servicing to a qualified service
engineer, through the appropriate Focusrite dealer.
2