Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ZEPHYRONLINE.COM
Horizontal Ducting Preparation
Monsoon Connect Use, Care, and Installation Guide
Installation Instructions
1. Follow steps 1 to 4 from pages
15 and 16. Remove blower molex
plug.
2. Remove blower from liner by
removing the (4) 3/16" x 3/8"
screws from the top of the liner.
Set screws aside for later usage.
3. Using a flat head screwdriver,
remove 8" round knock-out plate
at the back of the liner.
17
Publicité
Chapitres
Table des Matières
Dépannage
