Zephyr Monsoon Connect AK9428BS Guide D'utilisation, D'entretien Et D'installation page 21

ZEPHYRONLINE.COM
PBD-1300B Dual Blower Installation
Monsoon Connect Use, Care, and Installation Guide
Installation Instructions
5. Install previously removed blower
onto one side of dual blower plate
and attach by (4) previously
removed screws from step 2.
6. Install blower from PBD-1300B
kit onto other side of dual blower
plate by (4) 3/16 x 3/8 screws.
7. Dual blower screw mount
locations.
8. Remove (5) screws to remove
the light panel. Remove the dual
blower PCB from the component
box. Discard the component box.
Install dual blower PCB inside the
hood body.
21