Facom CL3.CH18S Notice Originale page 25

Noise values and vibration values (triax vector sum) according to EN60745-2-2
LPA (emission sound pressure level) dB(A)
LWA (sound power level) dB(A)
KWA (uncertainty for the given sound level) dB(A)
Tightening of fasteners at the maximum capacity of the tool
Vibration emission value ah = m/s2
Uncertainty K = m/s2
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to
compare one tool with another. It may be used for a preliminary assessment of exposure
WARNING: The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with
different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns.
Maintenance
Your FACOM power tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
WARNING: To reduce the risk of serious personal injury, place the forward/reverse button in the lock-off position or turn tool off and
disconnect battery pack before making any adjustments or removing/installing attachments or accessories.
Lubrication
Your power tool requires no additional lubrication.
Cleaning
WARNING: Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the tool. These chemicals may weaken
the plastic materials used in these parts. Use a cloth dampened only with water and mild soap. Never let any liquid get inside the tool; never
immerse any part of the tool into a liquid.
Charger cleaning instructions
WARNING: Shock hazard. Disconnect the charger from the AC outlet before cleaning. Dirt and grease may be removed from the
exterior of the charger using a cloth or soft non-metallic brush. Do not use water or any cleaning solutions.
Accessories
WARNING: Since accessories, other than those offered by FACOM, have not been tested with this product, use of such accessories with
this tool could be hazardous. To reduce the risk of injury, only FACOM-recommended accessories should be used with this product.
Consult your dealer for further information on the appropriate accessories.
WARNING: Use only impact accessories. Non-impact accessories may break and cause a hazardous condition. Inspect accessories prior
to use to ensure that it con tains no cracks.
Repairs
The charger and battery pack are not serviceable. There are no serviceable parts inside the charger or battery pack.
To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (including brush inspection and replacement) should be
performed by a FACOM authorized service center or other qualified service personnel. Always use identical replacement parts.
NU-CL3.CH18S_1016.indd 25
101
112
3
13
5,9
25
10/10/2016 14:53:47