Télécharger Imprimer la page

Zanussi ZDF26004WA Notice D'utilisation page 23

Publicité

Les langues disponibles

Les langues disponibles

RESET FUNCTION
Use Reset to:
Reset the currently running programme.
Stop the countdown of the Delay option.
Bring the appliance back to the programme
selection mode.
To Reset, press and hold
the appliance is in programme selection mode.
USER MODE
User mode allows to change the following settings:
Adjust the level of the water softener according
to the water hardness.
Activate or deactivate the rinse aid empty
notification.
Activate or deactivate AirDry.
Before entering user mode, make sure the
appliance is in programme selection mode:
1. Press and hold
The indicators
flash.
As the appliance stores the saved settings, there is
no need to configure it before every cycle.
THE WATER HARDNESS TABLE
German degrees
(°dH)
47 -50
43 - 46
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
<4
1) Factory setting
2) Do not use salt at this level.
DEACTIVATING THE RINSE AID EMPTY
NOTIFICATION
Make sure that the appliance is in user mode:
and
and
.
,
French degrees
(°fH)
84 - 90
76 - 83
65 - 75
51 - 64
40 - 50
33 - 39
26 - 32
19 - 25
7 - 18
<7
ADJUSTING THE WATER SOFTENER
Make sure that the appliance is in user mode:
1. Press
The indicators
The indicator
The display shows the current setting: e.g.
until
2. Press
pressing increases the level number by one.
After reaching level 10, the countdown starts
again from level 1.
3. Press on/off to confirm the setting.
If you use multi-tabs containing salt
and the hardness of your water is
lower than 21°dH, you can set the
lowest water softener level. It
deactivates the salt refill indicator.
If you use standard detergent or multi-
and
tabs without salt, set the proper water
hardness level to keep the salt refill
indicator active.
mmol/l
Clarke degrees
8.4 - 9.0
7.6 - 8.3
6.5 - 7.5
5.1 - 6.4
4.0 - 5.0
3.3 - 3.9
2.6 - 3.2
1.9 - 2.5
0.7 - 1.8
<0.7
1. Press
The indicators
.
still flashes.
= level 5.
to change the setting. Each
Water softener
58 - 63
53 - 57
46 - 52
36 - 45
28 - 35
23 - 27
18 - 22
13 - 17
5 - 12
< 5
.
and
and
are off.
level
10
9
8
7
6
1)
5
4
3
2
2)
1
are off.
23

Publicité

loading

Ce manuel est également adapté pour:

Zdf26004xa