Publicité
Maintenance
The TwisTorr 304 FS on board does not require any maintenance. Any
work performed on the system must be carried out by authorized
personnel. Before carrying out any operation on the system, it must
be disconnected from the power supply. If a fault occurs, it is
possible to use the Agilent repair service. Replacement controllers
are available on an advance exchange basis through Agilent.
WARNING!
Before carrying out any work on the controller, disconnect it from the power
supply.
Before returning the controller to the manufacturer for repairs, or replacement
NOTE
with a reconditioned unit, the "Request for return" sheet attached to this
instruction manual must be filled in and sent to the local sales office. A copy of
the sheet must be inserted in the system packaging before shipping.
If a controller is to be scrapped, it must be disposed of in accordance
with the specific national standards.
TwisTorr 304 FS on board Controller User Manual / 87-901-028-01 (A)
Instructions for Use
Maintenance
139/179
16
Publicité
Chapitres
