Dds Player Rear Panel Overview; Dds Player Front Panel Overview - Numark DDS 80 Guide D'utilisation

DDS PLAYER REAR PANEL OVERVIEW

1.
Power – Please plug in the supplied power adapter (DC 12V 2A) and connect it to a power source. Please
only use the supplied power adapter – using an alternate power adapter may result in damage to the DDS.
2.
DC Restraint – You may use this restraint to secure the power adapter cord to the unit. This will prevent the
cord from being accidentally unplugged.
3.
USB Inputs – Please attach your mass storage media to these two available USB ports* – a hub can be used
to expand to more USB inputs, but you should never plug a hub into a hub. We recommend you use only
powered hubs for maximum reliability. You may also connect the included USB keyboard to one of these ports
for quick navigation and searching.
Note: DDS can play MP3, WAV and AAC music formats stored on FAT16, FAT32, NTFS (read-only) and
HFS+ file systems.
4.
Line Out (B) – This RCA connection will output the audio signal from deck B on the DDS. Please use the
supplied stereo RCA cable to connect to a line-level input of your DJ mixer.
5.
Line Out (A) – This RCA connection will output the audio signal from deck A on the DDS. Please use the
supplied stereo RCA cable to connect to a line-level input of your DJ mixer.
6.
Fader Start Connectors – Use these connectors to plug into your fader-start compatible mixer. Fader Start
allows you to remotely start playback on either deck from a fader-start compatible mixer. With this feature,
every time you move the crossfader on your mixer toward either side, the track loaded on that deck will begin
playing. To use the DDS with a fader-start compatible mixer, connect the supplied fader-start cables from the
two connectors on the DDS to the fader-start connectors on your mixer. See "Deck Mode Settings" section for
more information.

DDS PLAYER FRONT PANEL OVERVIEW

1. Power Button – This button is used to turn the DDS on and off. Please always use this button when powering
off the unit. Unplugging the adapter or switching off power from an external source, such as a power strip, may
result in damage to the unit or the removable media. To power down the unit, please hold the power button
until the shutdown process completes.
2. USB Removable Media Input – Please attach your removable media to this USB port*.
3. Deck Section A – This area features the controls for deck A. Please see "Deck Controls (A and B)" section of
this manual for description of deck controls.
4. Deck Section B – This area features the controls for deck B. Please see "Deck Controls (A and B)" section of
this manual for description of deck controls.
5. Global Controls Section – This area features the LCD screen and the global controls of the DDS. Please see
"Global Controls" for description of global controls.
*PLEASE REMEMBER TO ALWAYS EJECT YOUR USB MEDIA BEFORE PHYSICALLY
REMOVING IT, OTHERWISE THE DATA MAY BECOME CORRUPT AND UNUSABLE.
2
4
6
1
5
3
6