Trouble Shooting - Josef Kihlberg B560 Mode D'emploi

8
Staples are not fed properly
Staples are deformed when inserted
Removing a staple which has got stuck
04.20

TROUBLE SHOOTING

FAULT ELIMINATION
– Check if the right type of staples is used.
Always use Josef Kihlberg original staples.
– Check if the feeder spring is not defective. If
necessary replace.
– Check if the staple pusher is not defective. If
necessary replace.
– Clean the staple track.
– Check return spring in the stapling head. If
necessary replace.
– Check if stapling head bearing has no play (refer
to chapter 7.4).
– Check if anvil is properly centered. (refer to chap-
ter 7.5).
Check if driver is not damaged. If necessary
replace.
– Check if the staple channel is clean.
– Refer to chapter 7.3.
Josef Kihlberg B560
13