marklin LINT 29100 Notice D'utilisation page 12

controller.
time, remove the batteries from the remote
controller.
batteries.Then clean the battery holder and the
contacts with a dry cloth.
Children could put batteries in their mouth and
swallow them. If a battery should be swallowed
take your child immediately to a hospital emer-
gency room.
6.2 Remote Controller
1
Unscrew the battery holder and lift up the
cover
2
shown in the drawing
12
Install or change the batteries only in
pairs according to the markings!
Pay attention to the polarity!
Put the cover for the battery holder back in
3
place.
Screw the battery holder down into place.
6.3 Train
The built-in rechargeable battery must be charged
up before operating the train for the fi rst time!
Make sure the train is turned off before char-
1
ging the battery.
2 Plug the mini USB plug on the recharging
cable included with the train into the mini
USB socket on the train.
The USB plug for the charging cable included
with this set may only be connected to a
charging device from Protection Class II
(example: from a cell phone charger), which
is provided with the following symbol:
The red light in the train will be on during the
charging process.