Filling In Water; Setting The Temperature; Symbols; Steaming - Rotel U912CH1 Mode D'emploi

 FILLING IN WATER
o
CAUTION! Always unplug the appliance before filling or emptying the tank. Never place the
iron under running water. Always use the enclosed measuring cup.
o
Proceed as follows:

Set the steam control dial (7) to "0".

Tilt the iron, place the beak of the measuring cup on the filling port (5) and slowly pour
the water into the tank.

Then set down the iron in a vertical position and set the desired temperature using the
temperature dial (1).

Plug in the iron and wait until the indicator lamp (6) switches off.
 SETTING THE TEMPERATURE
o
Select the desired temperature on the temperature dial (1). Set the iron down in a vertical
position and plug it in. The temperature dial lamp (2) will light up, indicating that the iron is
heating up.
 SYMBOLS
•
Low temperature. Synthetic fibres
••
Medium temperature. Silk, wool
•••
High temperature / steam. Cotton, linen
 STEAMING
o
Turn the temperature dial (1) to the desired temperature in the steaming range. Set the iron
down in a vertical position and wait until the indicator lamp (2) switches off. Set the steam
control dial (7) to the desired steam volume and wait until steam appears before starting to
iron. Setting down the iron in a vertical position automatically interrupts the discharge of
steam. You can also interrupt the discharge at any time by setting the steam control dial (7)
to "0". The iron has a display window that indicates the water level in the tank.
 DRY IRONING
o
Make sure that the steam control dial (7) is set to "0". Set the desired temperature using the
temperature dial (1).
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
20