Changing The Sound And Display - Sony CDX-F5500 Mode D'emploi

Changing the sound and
display settings
The following items can be set:
1
• REAR/SUB* — to switch the audio output
REAR or SUB.
– Select "REAR" to output to a power
amplifier.
– Select "SUB" to output to a subwoofer.
• CT (Clock Time) (page 20)
• A.SCRL (Auto Scroll)*
• M.DSPL (Motion Display) — to turn the
motion display on or off.
– Select "ON" to activate the motion display
(The moving pattern appears in the display).
– Select "OFF" to deactivate the motion
display.
• DEMO* 1 — to turn the demonstration display
on or off.
– Select "ON" to activate the demonstration
display (The demonstration starts about 10
seconds after the unit is turned off).
– Select "OFF" to deactivate the
demonstration display.
3
• BEEP* — to turn the beeps on or off.
• DIM — to change the brightness of the display.
– Select "ON" to dim the display.
– Select "OFF" to deactivate the Dimmer.
2 (page 12).
Switching the REAR/SUB
Press (SEL) and then press the
volume + (REAR) or – (SUB) button.
After 3 seconds, the display returns to normal
play mode.
Selecting the desired item
Press (SEL) and the desired button
simultaneously.
(SEL) + (2): CT
(SEL) + (3): A.SCRL*
(SEL) + (4): M.DSPL
(SEL) + (4): DEMO*
(SEL) + (6): BEEP*
(SEL) + (DSPL): DIM
After the mode setting is completed, the display
returns to normal play mode.
To cancel the item, press (SEL) and the desired
button simultaneously again.
*1 When the unit is turned off.
*2 When CD or MD is played.
*3 The beep sound is output only when the built-in
amplifier is used.
* 1
2
1
3
23