Cleaning The Appliance; Cleaning The Milk System - Siemens TI 903 Serie Mode D'emploi

en Daily care and cleaning

Cleaning the appliance

Wipe the outside of the appliance
1.
with a soft, damp cloth.
Clean the display using a micro-fibre
2.
cloth.
Any grounds residue in the grounds
3.
shaft should be directed down the
shaft using a soft brush.
Notes
If the appliance is cold when
■
switched on, or if it is switched off
after dispensing coffee, it rinses
automatically. The system is
therefore self-cleaning.
If the appliance has not been used
■
for a prolonged period of time (e.g.
while you are on holiday), clean the
entire appliance thoroughly,
including the milk system and
brewing unit.
Cleaning the drip tray and the coffee
grounds container
~ Fig. %
The drip tray and coffee grounds
Note:
container should be emptied and
cleaned every day in order to prevent
deposits.
Pull the drip tray with the coffee
1.
grounds container forwards and out.
Remove the drip plate.
2.
Empty and clean the drip tray and
3.
coffee grounds container.
Wipe out the interior of the appliance
4.
(intake trays).
Cleaning the milk container
~ Fig. '
For reasons of hygiene, the milk
Note:
container should be cleaned regularly
Dismantle the milk container into its
1.
individual parts.
Clean all parts of the milk container
2.
or put them in the dishwasher.
24

Cleaning the milk system

The milk system is automatically
cleaned with a short jet of steam directly
after preparing a milk drink.
:
Warning
Risk of burns!
The outlet system becomes very hot.
After use, always let the outlet system
cool down before you touch it.
~ Fig. #, ~ Fig. &
Manually clean the milk system on a
weekly basis, or more frequently if
required. For particularly thorough
cleaning, the milk system can be
additionally rinsed with water. ~ "Rinse
milk system" on page 26
Remove the milk system:
Remove the milk container from the
1.
appliance.
Slide the outlet system to the bottom
2.
position.
Press the unlocking mechanism at
3.
the top right.
Fold the cover down towards the
4.
front and remove.
Remove the milk system and
5.
dismantle into individual parts.
Clean the individual parts with
6.
detergent solution and a soft cloth.
Rinse all parts with clean water and
7.
leave to dry.
Notes
All parts of the milk system can be
■
cleaned in the dishwasher.
Detergent residues in the milk
system must be thoroughly removed
following the rinsing process.
Important: The outlet system cover
■
is not dishwasher-safe.