Siemens TI 903 Serie Mode D'emploi page 13

The table shows the allocation of the
levels to the different degrees of water
hardness:
Level Degree of water hardness
German (°dH)
1 1-7
2 8-14
3 15-21
4 22-30
Subsequent changes to the water
hardness can be made at any time.
~ "Menu settings" on page 20
Filling the bean container
This appliance can be used to prepare
coffee drinks from coffee beans or
ground coffee (not instant coffee).
Open the lid ): of the bean
1.
container )B.
Pour in the beans.
2.
Close the lid again.
3.
Notes
The coffee beans are freshly ground
■
for each brewing.
The coffee beans must be sealed
■
and stored in a cool place to retain
optimum quality.
Coffee beans can be stored in the
■
bean container for a number of days
without losing their aroma. Always
add the ground coffee first prior to
beverage preparation. ~ "Preparing
coffee using ground coffee"
on page 15
French (°fH)
1-13
14-25
26-38
39-54
Before using for the first time en
Filling the water tank
Important: Fill the water tank with fresh,
cold, still water on a daily basis. Prior to
operation, check whether the water tank
has been sufficiently filled.
Hold the recessed grip )" on the
1.
side of the water tank `and gently
tilt out the water tank to the side.
Use the handle to remove the water
2.
tank.
Insert the water filter. ~ "Inserting
3.
or replacing a water filter"
on page 22
The water filter is not included
Note:
in product package.
~ "Accessories" on page 11
Fill the water tank with water up to
4.
the "max" marking.
Re-insert the water tank into the
5.
holder and tilt back to the starting
position.
The brand logo lights up in the display.
The appliance heats up and rinses.
Some water will run out of the outlet
system.
The appliance is ready for use when the
symbols for the beverages and the
on/off button light up on the display.
13