Laserworld Diode Série Mode D'emploi page 8

Manual: Diode Series
7. Modes
• Automatic mode
Your device runs in auto mode (random playback of the preset patterns):
• DMX mode
Your device runs in DMX mode if '10' is switched on (Attention! For output values on
channel 2 and channel 3 must be >0!):
The DMX mode only works when a DMX controller is connected to the laser.
Use the switches 1 - 9 to set the DMX address of the laser. Each switch represents a num-
ber. To define a number use the preceding number and multiply it by 2:
1
Switch
1
Number
DMX The laser uses 11 DMX channels, which are explained in the following table.
Channel
1 Mode Select
2
3
4
5
6
7
8
9
page 8 / 30
2 3 4
2 4 8
Value
0 - 149
150 - 255
5 6 7
16 32 64
Function
Laser off
DMX mode
Attention! For output values on channel
2 and channel 3 must be >0!
Color
Attention! For output value must be >0!
Pattern select
Attention! For output value must be >0!
Y-axis movement
X-axis movement
X-axis rotation
Y-axis rotation
Z-axis rotation
no function
8 9 10
Mode
128 256
Switch