Partner; Robert Bosch Gmbh; Service; Fax - Bosch DL 0 607 460 400 Instructions D'emploi

Masquer les pouces Voir aussi pour DL 0 607 460 400:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
BS7460_gb_3609929100_t.fm5 Seite 3 Montag, 14. August 2000 2:37 14
Maintenance and Cleaning
Before performing any work on the machine it-
self, disconnect the air supply.
Keep the machine and the tool holder clean at all
times.
If the machine should happen to fail despite the care
taken in manufacture and testing, repair should be
carried out by an authorised customer services agent
for Bosch pneumatic tools.
For all correspondence and spare parts orders, always
include the 10-digit order number of the machine.
Lubrication
Lubricant:
Special gearbox grease 225 ml
3 605 430 009
Molycote grease
SAE 10 / SAE 20 motor oil
Clean regularly the screen on the air inlet of the ma-
chine. For this purpose, unscrew the hose connection
piece 5 and remove dust and dirt particles from the
screen. Then firmly remount the hose connection
piece.
Wash out the gearbox with petroleum after the first ap-
prox. 150 hours of operation and then every 300 hours
of operation and lubricate with special gearbox
grease.
Lubricate the moving parts of the clutch after approx.
each 100 000 bolting operations with a few drops of
SAE 10 / SAE 20 motor oil. Grease the sliding and
rolling parts with Molycote grease. Check the clutch
adjustment afterwards.
Any Bosch customer service centre can perform this
work quickly and reliably.
Dispose of lubricants and cleaning agents in an
environmentally correct manner. Observe legal
regulations.
Guarantee
We guarantee Bosch products in accordance with
statutory/country-specific regulations (proof of pur-
chase by invoice or delivery note).
Damage attributable to normal wear and tear, over-
load or improper handling will be excluded from the
guarantee.
In case of a claim, please send the machine, com-
pletely assembled, to your dealer or the Bosch
Service Centre for pneumatic tools or power tools.
Environmental Protection
These instructions are printed on recycled paper man-
ufactured without chlorine.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
Middlesex UB 9 5HJ

Service . . . . . . . . . . . . . . . . . . . . (01895) 838782

Fax . . . . . . . . . . . . . . . . . . . . . . . . . (01895) 838789

Advice line. . . . . . . . . . . . . . . . . . (01895) 838402
Ireland
Beaver Distribution Ltd.
Greenhills Road
Tallaght-Dublin 24
. . . . . . . . . . . . . . . . . . . . . . . . . . . . (01) 4515211
Fax . . . . . . . . . . . . . . . . . . . . . . . . . . . (01) 4517127
USA
Power Tool Service
3718 Polk Avenue
Houston, TX 77003
. . . . . . . . . . . . . . . . . . . . . . . . . . . (713) 228-0100
Fax . . . . . . . . . . . . . . . . . . . . . . . . . (713) 228-0619
We declare under our sole responsibility that this pro-
duct is in conformity with the following standards or
standardization documents:
EN 792, EN 50 144 according to the provisions of the
regulation 98/37/EC.
Robert Bosch GmbH, Geschäftsbereich Elektrowerkzeuge
Specification subject to alteration without notice
Recycle raw materials instead of
disposing as waste.
Machine, accessories and packaging
should be sorted for environment-
friendly recycling.
Preferential

Partner

Declaration of Conformity
Dr. Gerhard Felten
Dr. Eckerhard Strötgen
English–3

Publicité

Table des Matières
loading

Table des Matières