Installation; Unpacking - AEG L74850 Notice D'utilisation

96

Installation

IInstallation

Unpacking

All transit bolts and packing must be removed before using the appliance.
You are advised to keep all transit devices so that they can be refitted if the
machine ever has to be transported again.
1. After removing all the packaging, carefully lay
machine on it's back to remove the
polystyrene base from the bottom.
2. Remove the power supply cable and the
draining hose from the hose holders on the rear of the
appliance.
3.
With a suitable spanner unscrew and remove the
central rear bolt A.
HEC0008
HEC0001
HEC00022
A