Programm Option Buttons; Select The Prewash Option; Select The Stain Option - AEG L74850 Notice D'utilisation

68 use
Programme option buttons
Depending on the programme, different functions can be combined.
Attention: Not all the options are compatible between themselves. The symbols
of the incompatible options disappear.
Anyway, if an option, which is not compatible with the set washing programme
or any other option, is selected, the Err message is displayed for few seconds
and the yellow Start/Pause pilot light starts flashing.
You must select the options after you have selected the programme but before
pressing the «Start/Pause» button. Press the «Options» button: All the option
symbols appear on the display.
To scroll all the available options, depress the «Options» buttons. The
corresponding symbol appear on the display and starts flashing.
Depress the OK button to activate and confirm your choice. A black dash appears
under the selected symbol to indicate that this option has been set. Depress the same
button to deactivate the option.
After selecting the options, wait about 10 seconds untill the display gets back to the
default status. The selected options appear on the display.

Select the Prewash option

Select this option if you wish your laundry to be prewashed at 30°C before the
main wash.
The Prewash ends with a short spin in
programmes for cotton and synthetic fabrics,
whereas in the programmes for delicate
fabrics the water is only drained.
For the compatibility between this option and
washing programmes consult the chapter
«Washing programmes».
The relevant symbol will appear on the display.

Select the Stain option

Select this option to treat heavily soiled or
stained laundry with stain remover (extended
main wash with time optimised stain action
phase).
This option is not available with a
temperature lower than 40°C.
For the compatibility between this option and all washing programmes consult the
chapter «Washing programmes».
1 2
1 2